Speedway Ford 9 Inch Rearend Axle Housing Kit, 54 In. Early Ford

Description

Preserving traditional hot rod styling and designs of the past is getting more difficult by the day. In the past, acquiring a set of finned Buick brake drums for the rear of your traditional Ford hot rod required running a weak, closed driveshaft-type rear axle that would quickly fail when paired with a SBC - not any longer!
If you're looking for a budget-friendly and rock-solid rearend to complete your upgraded driveline with an added touch of 60s hot rod style, look no further. For the first time ever, you can buy a brand new 9" housing that comes with an axle flange designed to fit 30s-40s Ford backing plates, and a custom axle offset specifically designed for Buick Finned Brake Drums or early Ford iron drums
Speedway Ford 9 Inch Rearend Axle Housing Kit, 54 In. Early Ford
Sku # 91046154
Mfr. Part # 91046154
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Info
Preserving traditional hot rod styling and designs of the past is getting more difficult by the day. In the past, acquiring a set of finned Buick brake drums for the rear of your traditional Ford hot rod required running a weak, closed driveshaft-type rear axle that would quickly fail when paired with a SBC - not any longer!
If you're looking for a budget-friendly and rock-solid rearend to complete your upgraded driveline with an added touch of 60s hot rod style, look no further. For the first time ever, you can buy a brand new 9" housing that comes with an axle flange designed to fit 30s-40s Ford backing plates, and a custom axle offset specifically designed for Buick Finned Brake Drums or early Ford iron drums. These fabricated steel Ford 9" rearend housing kits feature all-new components for maximum durability. This 9 inch Ford axle housing is pumpkin-centered, which will offset the pinion yoke about 1". This is done to make fabricating a triangulated 4-link system much easier. Simply weld on your preferred brackets, slip in the included 31-spline axles and add the 3rd member of your choice (sold separately), and you have yourself a bulletproof vintage axle!
Total wheel-to-wheel mounting surface width is 54" (from hub-to-hub). The pumpkin is centered in the housing, which puts the pinion 1" offset from center, requiring different length axle shafts. This 54" housing kit includes one 27-5/8" long axle and one 25-1/4" long axle. These axle housing kits are specific to the brake configuration of Ford Bendix backing plates combined with our Buick brake drums or Ford iron drums, meaning it's never been easier to run finned Buick drums on all four corners of your ride! Flanges are drilled for 5 x 5 1/2" bolt pattern
Kit includes the fabricated housing, a pair of axle shafts with bearings and seals, heavy-duty retainer plates, and 1/2"-20 Ford/Mopar wheel studs. Also included are (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
New stamped steel round back housing centerpiece
New billet steel housing ends with oil seal surface
3" O.D. DOM 1/4" wall axle tubes
31-spline axles w/ bearings, studs & retainers
1/2"-20 wheel studs, 2" long
5 x 5-1/2" wheel bolt pattern
3-3/8" center-to-center axle flange bolt pattern fits Ford Bendix style backing plates
Custom axle shaft to housing offset designed specifically for Buick finned brake drums or Early Ford iron drums
Few things distinguish a 1960s-era hot rod better than Buick finned brake drums. The fins poking out from inside the wheels and spinning along with them was a killer look, but more importantly, it showed you had some serious ponies that required some serious stopping power. When Buick debuted their finned drums in 1957, progress in the automotive industry had been moving at a lightning pace. A mere ten years earlier, a hot ride had 130-150 horsepower - when Buick debuted their finned drums, serious rodders and racers were pushing 350 horsepower. To go along with this nearly 135% increase in power, cars were getting heavier and utilizing automatic transmissions. All of these factors combined meant that your brakes were needing to stop more weight, with more than twice as much power, and without the help of engine braking from a manual transmission. This combination meant that the usual braking systems were incredibly strained, even one high-speed stop or long downhill road could double your stopping distance from heat-induced brake fade, or worse, complete overheating failure in extreme situations. Buick's solution of adding fins around their drums to disperse heat, while constructing them from a combination of aluminum and steel for maximum weight savings took the performance industry by storm.
If there are two things that aftermarket automotive enthusiasts understand, it's weight savings and the importance of cooling efficiency. Rodders quickly figured out how to fit these state-of-the-art finned drums on the front of their hot rods with a bit of machining and drilling. In rare instances, you can find someone who had fitted the rear of their car with these stylish drums, but that process was far more labor-intensive than the fronts - discouraging those who weren't inclined to engineer a setup from scratch. If you've been daydreaming of Buick Finned Drums on all four corners of your ride, but haven't felt up to the task of the fabrication required to make them work - this kit is exactly what you need.
Specs
Sold in Quantity
Kit
Bolt Pattern
5 on 5.5"
Housing Material
Steel
Thread Pitch
1/2"-20
Hardware Included
Yes
Overall Width
54
Tube O.D.
3
Position
Rear
Rotors Included
No
Wheel Studs Included
Yes
Axle Splines
31
Axle Type
Semi-Floating
Differential Included
No
Brakes Included
No
Bearings Included
Yes
Seals Included
Yes
MFG. Part #
91046154
Related Items / Suggested Parts
Aluminum Buick Front Brake Drum Kit, 12x2, 45-Fin, Plates/Hubs
Buick-Style Finned Aluminum Brake Drum for Ford Spindles, 12 x 2
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.